TRENDnet TEW-740APBO Quick Installation Manual page 13

Hide thumbs Also See for TEW-740APBO:

Table of Contents

25. When prompted, click Reboot at the top of the page, click the Reboot button, and click Yes

to reboot and apply the configuration changes.

Note: After the device reboots and applies changes, you will need to reconnect to device

configuration page using the new IP address settings.

Yes

Phase 3: TEW-740APBO Unit #2 Hardware Setup and Configuration

When configuring the TEW-740APBO #2, repeat all of the steps in Phase 2 setup and

configuration.

1. In Step 19 and 20, under IP Setup, enter the IP Address 192.168.10.51 and Netmask

255.255.255.0. Then click Save.

2. In Step 24, under WDS Client Setup, enter the WiFi MAC address of TEW-740APBO Unit #1.

Then click Save.

Reboot

Table of Contents