Table Of Contents - Siemens AR50M-MF User Manual

Table of Contents

1 Introduction
2 Technical data
2.1 FCC statements
3 Safety regulations
4 Reader components and package contents
4.1 Reader components
4.2 Package contents
5 Mounting and connecting
5.1 Mounting a reader
5.2 Mounting a reader with cables fed from the side
5.3 Connecting the cables
5.3.1 Connecting the reader in OSDP mode
5.3.2 Connecting the reader in Wiegand mode
5.4 Setting the Jumpers
5.5 Setting the Jumpers for OSDP
5.6 Setting the Jumpers for Wiegand
5.7 Reverse mode Wiegand
5.8 Programming a reader for reverse mode transmission
5.8.1 Reverting to standard mode Wiegand
5.9 Programming a Reverse mode transmission reader for 26 Bit Wiegand
5.9.1 Re-programming a reverse mode transmission reader away from 26 Bit Wiegand
5.10 Default Configuration Card
5.10.1 37 Bit Wiegand.
6 Closing the reader
7 Disassembling the reader
7.1 To disassemble the reader:
7.2 To remove the terminal block:
8 Default settings
8.1 3CT Tool
8.2 Setting burst mode using the keypad
9 Connecting the reader to SiPass integrated
9.1 Connecting the reader to SiPass integrated in OSDP mode
9.2 Setting OSDP address for the reader
9.3 Connecting the reader to SiPass integrated in Wiegand mode
10 Connecting the reader to ACT
10.1 Connecting the reader to ACT in OSDP mode
10.2 Setting the OSDP address for the reader
5
6
7
8
9
9
9
10
10
11
13
13
14
16
16
17
19
20
20
20
21
21
21
22
23
23
24
25
25
26
27
27
28
28
29
29
30