Siemens AR50M-MF User Manual page 18

Mullion Reader – User Manual
If the existing installation uses 26 Bit Wiegand, you must follow the additional procedure to program the
reader to transmit in Reverse Mode 26 Bit Wiegand.
For more information, please refer to:
Reverse mode Wiegand on the next page.
l
Only one of the two modes may be configured at a time.
Wiegand - Standard mode transmission
Wiegand
56 Bit
37 Bit
32 Bit
26 Bit
Wiegand - Reverse mode transmission
Wiegand
56 Bit
37 Bit
32 Bit
26 Bit
The diagrams below show how to position the Jumpers to get the desired functions from the terminal
blocks. Note that in Wiegand mode EOL is not fitted. Wiegand can be set at 32 bit, 37 bit, or 56 bit.
Jumper 1
Jumper 1 is OFF to select Wiegand.
© Siemens 2019
Standard transmission
Reverse
Re-program
mode
necessary
transmission
Yes Yes
No
Yes Yes
Yes Yes
Yes
Yes
Yes
No
Procedure
Programming a reader for reverse
mode transmission on page 20
Programming a reader for reverse
mode transmission on page 20
Programming a reader for reverse
mode transmission on page 20
18
Mounting and connecting
Re-program necessary
No
No
No
Mandatory
additional
procedure
No
No
Programming a
Reverse mode
transmission
reader for 26 Bit
Wiegand on
page 20
A-100417-b
15.04.2019