Siemens AR50M-MF User Manual page 32

Mullion Reader – User Manual
10.3 Connecting the reader to ACT in Wiegand mode
For more detail on connecting the reader to ACT via Wiegand see Connecting the reader in
Wiegand mode on page 14.
© Siemens 2019
If you are connecting an exit reader in Wiegand mode, you should wire the
D0 from the reader to SENSE on the ACTpro 1500 (bordered in red on the
image below).
32
Connecting the reader to ACT
A-100417-b
15.04.2019