Table of Contents
Advertisement
VIPA System SLIO
3.2 Structure
054-1CB00
Connections
HB300 | FM | 054-1CB00 | en | 18-06
1
Locking lever terminal module
2
Labeling strip
3
Backplane bus
4
LED status indication
5
DC 24V power section supply
6
Electronic module
7
Terminal module
8
Locking lever electronic module
9
Terminal
CAUTION!
Danger of injury from electrical shock and damage to the unit!
Put the System SLIO in a safe, powered down state before starting instal-
lation, disassembly or wiring of the System SLIO modules!
You can use wires with a cross section of 0.08mm
lines the following requirements apply:
n
For the digital I/O connection with DIO operation single lines can be used. In encoder
mode, shielded cables are to be used.
n
A motor must be connected via shielded lines.
Generally, power and signal lines must be laid separately.
n
Hardware description
2
2
up to 1.5mm
. For the connection
Structure
35
Advertisement
Table of Contents
