Ordering Codes And Accessories - THORLABS ITC8000 Operation Manual

ITC8000
Thorlabs is not responsible for any radio television interference caused by modifications of this
equipment or the substitution or attachment of connecting cables and equipment other than those
specified by Thorlabs. The correction of interference caused by such unauthorized modification,
substitution or attachment will be the responsibility of the user.
The use of shielded I/O cables is required when connecting this equipment to any and all optional
peripheral or host devices. Failure to do so may violate FCC and ICES rules.
Attention
Mobile telephones, cellular phones or other radio transmitters are not to be used within the range of
three meters of this unit since the electromagnetic field intensity may then exceed the maximum
allowed disturbance values according to IEC 61326-1.
This product has been tested and found to comply with the limits according to IEC 61326-1 for
using connection cables shorter than 3 meters (9.8 feet).

1.2 Ordering Codes and Accessories

Please refer to the actual catalog or the web for an actual list of available plug in modules and
accessories and for the complete ordering codes.
Ordering Code
ITC8022
ITC8022DS15
ITC8052
ITC8052DS15
ITC8102
ITC8102DS15
CAB400
CAB420-15
CAB430
6
Short Description
Laser Controller ± 200 mA,
Temperature Controller Module ± 2 A,
9 pin connector for laser diode, 15 pin connector for TEC
Laser Controller ± 200 mA,
Temperature Controller Module ± 2 A,
One common 15 pin connector for laser and TEC
Laser Controller ± 500 mA,
Temperature Controller Module ± 2 A,
9 pin connector for laser diode, 15 pin connector for TEC
Laser Controller ± 500 mA,
Temperature Controller Module ± 2 A,
One common 15 pin connector for laser and TEC
Laser Controller ± 1 mA,
Temperature Controller Module ± 2 A,
9 pin connector for laser diode, 15 pin connector for TEC
Laser Controller ± 1 mA,
Temperature Controller Module ± 2 A,
One common 15 pin connector for laser and TEC
Laser Diode Current Controller Connection Cable for ITC8000 modules, 1.5
m, to connect Thorlabs Laser Diode Mounts
Temperature Controller Connection Cable for ITC8000 modules, 1.5 m, to
connect Thorlabs Laser Diode Mounts
Laser Diode Current and Temperature Controller Connection Cable for
ITC8000DS15 modules, 1.5 m, to connect Thorlabs Laser Diode Mounts
© 2016 Thorlabs