Table of Contents
Advertisement
..3
SERVICING INTERVALS
The period recommended is
based on normal operating condi-
tions. Severe or unusual condi-
tions may require more frequent
lubrication or oil changes.
Hours or Daily
1. Check engine oil level (gas
engine only).
2. Check fuel level.
0 Hours or Weekly
1. Check blower drive belt tension. Be sure
spring has some gap between the coils when
the drive is engaged.
2. Check rotor drive belt tension. Move the idler
pulley to set the belt tension.
WARNING
Machine is shown with guard re-
moved for illustrative purposes only.
Do not operate machine with guard
removed.
3. Check the chopper drive belt tension. Move
the idler pulley to set the belt tension.
Fig. 30 ENGINE
Fig. 3 DRIVE SYSTEM TENSION
Fig. 3 CHOPPER DRIVE BELT
3
3
Advertisement
Table of Contents
