AgriMetal 4413 Manual page 22

. CONTROLS
Before starting to work, all operators should famil-
iarize themselves with the location and function of
the controls.
1. Gas Engine:
Read the engine manufac-
turers operator's manual
before starting for more
detailed instructions.
a. Choke:
This lever controls the
position of the choke.
Move the lever rear-
ward to close the choke
for starting when the
engine is cold. Move
the lever forward to
open the choke as the
engine warms. Always
move the lever fully
forward when operating
the machine.
b. Fuel Supply Valve:
This valve controls the
supply of fuel to the
engine. Turn the valve
at right angles to the
fuel line to turn the fuel
supply off and parallel
to turn on.
c. Throttle - Max Speed:
This lever, through a
push-pull cable, sets
the throttle position.
Move the lever forward
to set the engine speed
at maximum RPM.
d. Throttle - Low Idle:
This lever, through a
push-pull cable, sets
the throttle position.
Move the lever rearward to set the engine
speed at low idle.
e. Engine Stop:
The engine stop is part of the throttle con-
trol lever. Move the lever fully rearward to
stop the engine.

c d e
Fig.  CONTROLS
a
b
Engine
e
d
c
Throttle