Table of Contents
Advertisement
10. Set the length of the
hitch to prevent in-
terference between
the tire of the power
unit and the machine
frame.
11. Tighten anchor bolt
and set screw to their
specified torque when
hitch is properly posi-
tioned.
IMPORTANT
Turn sharply at a slow
speed while watching
tire/frame clearance.
Extend or retract hitch
to provide at least 2-4
inches (50-100 mm)
clearance.
12. Reverse the above
procedure when
unhooking from the
tractor.
Fig. 0 HITCH LENGTH
Clearance
Hitch
Advertisement
Table of Contents
