Decommissioning And Disposal; Decommissioning; Disposal - Interroll ZoneControl Operating Manual

9

Decommissioning and disposal

CAUTION
Risk of injury from following incorrect procedure.
Decommissioning must only be carried out by authorised, qualified personnel.
¾
Only decommission the ZoneControl when the system has been disconnected from the power supply.
¾
Switch off the power to the ZoneControl and ensure that it cannot be unintentionally switched on again.
¾
9.1

Decommissioning

Remove all cables from the ZoneControl.
¾
Loosen the screws that have been used to attach the ZoneControl to the conveyor frame.
¾
Remove the ZoneControl from the conveyor frame.
¾
9.2

Disposal

The operating company is responsible for disposing of the ZoneControl according to correct procedure. In
doing so, the industry-specific and local provisions for disposing of the ZoneControl and its packaging must
be observed.
Version 2.0 (04/2019) Online
Translation of the original operating manual
Decommissioning and disposal
49 von 54