Interface To Other Devices; Operating Modes/Operating Phases; Standard Operation; Special Operation - Interroll ZoneControl Operating Manual

2.6

Interface to other devices

The integration of the ZoneControl into a conveyor system can create additional potential hazards. Such potential
hazards are not covered by this operating manual and must be analysed during the development, installation and
commissioning of the conveyor system as a whole.
Following the integration of the ZoneControl into a conveyor system, the entire system must be checked for any
¾
new potential hazards that may be present before the conveyor is switched on.
2.7

Operating modes/operating phases

Standard operation

Operation in the installed condition at the end customer as a component in a conveyor in an overall system.

Special operation

Special operation encompasses all operating modes/operating phases that are necessary to guarantee and maintain
safe standard operation.
Special operating mode
Transport/storage
Assembly/commissioning
Cleaning
Maintenance/repair
Fault location
Troubleshooting
Decommissioning
Disposal
Version 2.0 (04/2019) Online
Translation of the original operating manual
Safety-related information
Comments
-
In de-energised state
In de-energised state
In de-energised state
-
In de-energised state
In de-energised state
-
13 von 54