Interroll ZoneControl Operating Manual page 4

Inhalt
3.6 Meaning of the LEDs
3.7 DIP switches
3.8 Meaning of signals
ZONE_STATUS
3.9 Dimensions
4 Transport and storage
4.1 Transport
4.2 Storage
5 Assembly and installation
5.1 Warning notices for installation
5.2 Assembling the ZoneControl
5.3 Warning notices for electrical installation
5.4 Electrical installation
Required cables:
Signal status of inputs
Signal status of outputs
Schematics of all outputs
5.5 Sensors
5.6 Inputs and outputs
RollerDrive connection: 8 mm snap-in, 5-pin, pin location in accordance with DIN EN 61076-2
Start sensor connector: WAGO 733-103 mating plug
Zone sensor connector: WAGO 733-103 mating plug
Upstream peer-to-peer connection: RJ45 socket, 8-pin Molex 43860
Power supply connector: WAGO 734-102 mating plug
Inputs/outputs connector: WAGO 733-108 mating plug
Downstream peer-to-peer connector: RJ45 socket, 8-pin Molex 43860
5.7 Wiring diagrams
ZoneControl within the conveyor section
ZoneControl at the start of the conveyor section
ZoneControl at the end of the conveyor section
Connection of the external speed control
Connection of a second RollerDrive
6 Initial startup and operation
4 von 54
Version 2.0 (04/2019) Online
Translation of the original operating manual
20
21
22
22
22
23
23
23
24
24
24
25
26
26
28
28
28
29
30
30
30
31
31
32
32
33
34
34
35
36
37
38
39