Replacing The Front Or Rear End Cap - Emerson FB1100 Quick Start Manual

Replacing the Front or Rear End Cap

DANGER
EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing end cap(s) in
a hazardous location could result in an explosion.
1.
2.
3.
4.
Front End Cap
Rear End Cap
Grasp the end cap (front or rear).
Carefully align the end cap threads with the threads of the enclosure.
Important
When replacing the rear end cap, ensure wires connecting to the terminal plate do not get
crimped or caught between the end cap threads and the enclosure.
Screw the end cap clockwise (eight full turns) until it is tightly sealed to the enclosure.
Replace the retaining clamp (if applicable).
Emerson FB1100 Flow Computer Quick Start Guide
Removing Front End Cap
Removing Rear End Cap
D301785X012
March 2019
5