Emerson FB1100 Quick Start Manual page 23

Connecting the Main Battery Pack
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
If you purchased one of the battery/solar panel options, note that the device ships with the battery
pack disconnected to preserve battery life. You need to connect the main battery pack before you
place the device in service.
The device provides two battery connections, enabling you to hot-swap the battery pack in a non-
hazardous location.
1.
2.
3.
Remove the front end cap by unscrewing it counter-clockwise.
Loosen the four captive fastening screws that hold the HMI module. Carefully pull the
module away from the flow computer and off the tab and set it aside.
Connect the battery to either of the two connectors.
Emerson FB1100 Flow Computer Quick Start Guide
D301785X012
March 2019
21