Replacing The Front Or Rear End Cap - Emerson FB1200 Quick Start Manual

2. Unscrew the end cap turning it counter-clockwise until the end cap comes off. Set it

Replacing the Front or Rear End Cap

EXPLOSION HAZARD: Never remove end cap(s) in a hazardous location. Removing end
cap(s) in a hazardous location could result in an explosion.
1. Grasp the end cap (front or rear).
2. Carefully align the end cap threads with the threads of the enclosure.
3. Screw the end cap clockwise (eight full turns) until it is tightly sealed to the enclosure.
4. Replace the retaining clamp (if applicable).
aside in a safe location.
Front End Cap
Rear End Cap
DANGER
Important
When replacing the rear end cap, ensure wires connecting to the terminal plate do not
get crimped or caught between the end cap threads and the enclosure.
Emerson FB1200 Flow Computer Quick Start Guide
Removing Front End Cap
Removing Rear End Cap
D301786X012
June 2018
5