Our full-time professional instructors can conduct classroom training at several of our corporate offices, at your site, or even at your regional Emerson office. You can also receive the same quality training via our live, interactive Emerson Virtual Classroom and save on travel costs. For our complete schedule and further information, contact the Remote Automation Solutions Training Department at 800-338-8158 or email us at education@emerson.com.
Page 3
FB1100/FB1200 Flow Computer HMI Module Field Replacement Guide D301816X012 November 2020 Removing/Replacing HMI Module The flow computer includes a human machine interface (HMI) module. Depending upon the type ordered, it may include Wi-Fi ® capability and/or a liquid crystal display (LCD). In all cases the methods for removing/replacing are the same.
Flow Computer HMI Module Display Assembly without LCD and with Wi-Fi Field Installed Accessory Kit Part No. 399380-01-0 for use with UL Listed Model Series FB1100 and FB1200. Flow Computer HMI Module Display Assembly without LCD and Wi-Fi Field Installed ...
Page 5
FB1100/FB1200 Flow Computer HMI Module Field Replacement Guide D301816X012 November 2020 Components of Retaining Clamp Assembly Screw Retaining Clamp Washer Grasp the end cap (front or rear). Front End Cap Rear End Caps Unscrew the end cap turning it counter-clockwise until the cover comes off. Set it aside in a safe location.
Page 6
FB1100/FB1200 Flow Computer HMI Module Field Replacement Guide D301816X012 November 2020 Captive Fastening Screws Grasp the HMI module and remove it by gently pulling it straight out. To replace the HMI module, line up the printed circuit board (PCB) with the slot on the back of the replacement module and gently press the new HMI module on.
Page 7
FB1100/FB1200 Flow Computer HMI Module Field Replacement Guide D301816X012 November 2020...