Wiring I/O
DANGER
EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.
Performing this operation in a hazardous area could result in an explosion.
Notes
▪
▪
Digital Output (External Powered)
1
2
You should terminate all shields at chassis ground.
When using the digital output to drive an inductive load (such as a relay coil), place a
suppression diode across the load. This protects the DO from the reverse Electro-Motive
Force (EMF) spike generated when the inductive load is switched off.
30Vdc (max)
500 mA Max Load
Emerson FB1100 Flow Computer Quick Start Guide
D301785X012
March 2019
17