GYROZEN 416 Quick Manual

Display & Control Panel
Display Window
Status of Speed
(RPM / RCF)
Operation
Function Selection
Press a parameter (RPM/
RCF or TIME) to be changed
Press up and down buttons to
change and press the buttons Press a parameter
(RPM / RCF or TIME) to be changed (RPM / RCF or TIME) again to save
Quick Guide
Display Window
Status of Time (MIN / SEC)
Program (Call / Save)
Setting Time
Setting Speed
To 99 min. 59 sec.
Press once : RPM
Press twice : RCF or Continuous (00:00)
PROG Save / Call
Press once : CALL / Press countinuous : SAVE
Press up and down
buttons to change and
press PROG button again
to save or call
Low-Speed, Clinical Centrifuge
Soft Start / Stop (For Sensitive Samples)
LED ON : Soft Start / Run (gentle acceleration)
LED OFF : Soft Stop (gentle deceleration)
Start / Stop
LED ON : Start / Run
LED OFF : Stop
Start / Stop
Press START / STOP
It is good for avoiding agitation of
sample during acceleration and
deceleration.
Door Open
Open : LED turns on
Program SAVE / CALL
Press once : CALL
Press continuous : SAVE (up to 10)
Cat. No. GZ-0416
SOFT Start / Stop
After setting the
parameters, press
SOFT START / STOP.
When it is started by
SOFT START/STOP
button, press this
button again to stop
the working.