Table 4-6: Comparison Between Dfs Implementations For Various Country Codes On The Su - Alvarion BreezeACCESS EZ AU-EZ System Manual

Chapter 4 - Operation and Administration

Table 4-6: Comparison between DFS implementations for various country codes on the SU

Action Parameter
When reverting DFS Option
the unit to
factory default
settings
When upgrading DFS Option
from a previous
software version
When changing DFS Option
the country code
Channel Check
Time
Channel
Avoidance
Period
Minimum
Pulses to
Detect
Frequency
Subset
Definition
The Frequency Definition submenu includes the following options:
4.2.6.2.2.3 Sub-Bands Select
Each unit is delivered with a pre-configured Sub-Band, according to the
applicable Country Code. This set of parameters includes also the frequencies
that can be used.
The parameters that determine the frequency to be used are set in the AU. The SU
should be configured with a minimal set of parameters to ensure that it will be
able to automatically detect and use the frequency used by the AU, including
possible changes in this frequency.
BreezeACCESS EZ AU-EZ
ETSI 5.4 GHz ETSI 5.8 GHz
According to According to
country code country code
definition definition
false According to
country code
definition
According to According to
country code country code
definition definition
60 sec. 60 sec.
(600 sec. for (600 sec. for
freq. between freq. between
5600 and 5650 5600 and 5650
MHz) MHz)
30 min. 30 min.
4 4
According to According to
country code country code
definition definition
74
Menus and Parameters
Universal FCC
false According to
country code
definition
false Unchanged
false
 AU - According
to country code
definition

SU - false
60 sec. 60 sec.
30 min. 30 min.
4 4
According to ALL
corresponding
ETSI 5.4/5.8
System Manual