Alvarion BreezeACCESS EZ AU-EZ System Manual page 122

Chapter 4 - Operation and Administration
4.2.6.4.2.4 Show Ethernet Broadcast/Multicast Limiter
The Show Ethernet Broadcast/Multicast Limiter displays aggregated information
regarding Ethernet Broadcast/Multicast Limiter activation, threshold and send
trap interval.
4.2.6.4.3 Bridge Aging Time
The Bridge Aging Time parameter enables selecting the bridge aging time for
learned addresses of devices on both the wired and wireless sides, not including
BreezeACCESS units.
The available range is 20 to 2000 seconds.
The default value is 300 seconds.
4.2.6.4.4 Broadcast/Multicast Relaying
The Broadcast/Multicast Relaying option enables selecting whether the unit
performs relaying of broadcasts and/or multicasts.
The available options are:
Disable

Broadcast/Multicast Enable

Broadcast Enable

Multicast Enable

If broadcast/multicast relaying if disabled, these packets are sent only to the local
wired LAN and are not sent back to the wireless link. When broadcast and or
multicast relaying is enabled, the relevant packets (broadcasts only, multicasts
only or both broadcasts and multicasts) originating from devices on the wireless
link are transmitted by the AU back to the wireless link devices, as well as to the
wired LAN.
The default selection is Broadcast/Multicast Enable.
4.2.6.4.5 Unicast Relaying
The Unicast Relaying option enables selecting whether the unit performs unicast
relaying. When the Unicast Relaying parameter is enabled, unicast packets
originating from devices on the wireless link can be transmitted back to the
wireless link devices. If disabled, these packets are not sent to the wireless link
even if they are intended for devices on the wireless link. Disable the Unicast
Relaying parameter only if all unicast messages from the wireless link are certain
to be directed to the local wired LAN.
BreezeACCESS EZ AU-EZ 103
Menus and Parameters
System Manual