Transmit Power Compliance With Regulations; Table 3-2: Regulation Maximum Eirp - Alvarion BreezeACCESS EZ AU-EZ System Manual

Table of Contents

Chapter 3 - Commissioning

3.2

Transmit Power Compliance With

Regulations

CAUTION

In regions where local radio regulations limit the maximum transmit power of the unit the installer is

responsible to properly set the Antenna Gain parameter (if configurable) according to the actual

antenna being used. This will limit the upper limits of the Tx Power parameter in the AU to the value

of "Permitted EIRP-Antenna Gain".

The Tx Power parameter should not exceed the Permitted EIRP-Antenna Gain, according to the

following table:

Country Code

FCC 5.3 GHz

FCC 5.4 GHz

ETSI 5.4 GHz

ETSI-F 5.4 GHz

Australia 5.4 GHz

Universal 5.4 GHz

FCC 5.8 GHz

UK 5.8 GHz

Australia 5.8 GHz

India 5.8 GHz

Germany 5.8 GHz

Universal 5.8 GHz

NOTE: (FCC 5.3 GHz units)

For full compliance with FCC regulations, if you wish to include one or more of

frequency channels 5270, 5275 and 5330 MHz in the set of frequencies to be

used, then the Transmit Power parameter in the AU should not be set to a value

above "20-Antenna Gain". If there is a need to use a higher value for this

parameter, these frequencies should not be used.

BreezeACCESS EZ AU-EZ

Maximum EIRP (dBm)

30 (See NOTE Below)

Transmit Power Compliance With Regulations

System Manual

Table of Contents