Table of Contents
Advertisement
Chapter 4 - Operation and Administration
4.2.6.3.6.4
Show Network Management IP Address Ranges
Displays all the 10 available IP address ranges from which the unit can be
managed when Network Management Filtering is enabled.
4.2.6.3.7
SNMP Traps
The SNMP submenu enables or disables the transmission of SNMP Traps. If this
option is enabled, up to 10 IP addresses of stations to which SNMP traps are sent
can be defined.
4.2.6.3.7.1
Send SNMP Traps
The Send SNMP Traps option enables or disables the sending of SNMP traps.
The default selection is Disable.
4.2.6.3.7.2
SNMP Traps Destination IP Addresses
The SNMP Traps Destination IP Addresses submenu enables defining up to 10 IP
addresses of devices to which the SNMP Traps are to be sent.
The default of all 10 SNMP Traps IP destinations is 0.0.0.0.
4.2.6.3.7.3
SNMP Traps Community
The SNMP Traps Community option enables defining the Community name for
each IP address to which SNMP Trap messages are to be sent.
Valid strings: Up to 8 ASCII characters.
The default for all 10 addresses is "public", which is the default Read community.
4.2.6.3.7.4
Delete One Trap Address
The Delete One Trap Address option enables deleting Trap address entries from
the SNMP Traps Addresses list.
4.2.6.3.7.5
Delete All Trap Addresses
The Delete All Trap Addresses option enables deleting all entries from the SNMP
Traps Addresses list.
4.2.6.3.7.6
Show Traps Parameters
The Show Traps Parameters displays all the 10 available IP addresses to which
the SNMP Traps are to be sent and their corresponding communities.
4.2.6.3.8
Show Network Management Parameters
Aggregates information regarding: type of access to Network Management,
Network Management IP filtering, Network Management IP addresses,
activation/deactivation of SNMP traps sending, SNMP traps destination IP
addresses and communities and Network Management IP address ranges.
BreezeACCESS EZ AU-EZ
95
Menus and Parameters
System Manual
Advertisement
Table of Contents
