Table of Contents
Advertisement
Chapter 4 - Operation and Administration
VLAN Traffic Priority
Show VLAN Parameters
4.2.6.4.1.1
VLAN ID-Management
The VLAN ID-Management is applicable for all link types. It enables defining the
VLAN ID for management frames, which identifies remote stations for
management purposes. This applies to all management applications using
protocols such as SNMP, TFTP, ICMP (ping), DHCP and Telnet. All
servers/stations using these protocols must tag the management frames sent to
the unit with the value of the VLAN ID-Management parameter.
Valid values: 1 to 4094 or 65535 (No VLAN).
The default value is 65535.
If the VLAN ID-Management is other than 65535:
Only tagged management frames with a matching VLAN ID received on either
the Ethernet or wireless link ports are forwarded to the unit.
A VLAN Management Tag is inserted in all management frames generated by
the unit before transmission on either the Ethernet or wireless link port. The
tag includes the values of the VLAN ID-Management and the VLAN
Priority-Management parameters.
If the VLAN ID-Management is 65535 (No VLAN):
Only untagged management frames received on either the Ethernet or wireless
link ports are forwarded to the unit.
Management frames generated by the unit are not tagged.
The following table summarizes the functionality of the internal management port
in accordance with the value of the VLAN ID-Management parameter. The table is
valid for all link types. Refer to the VLAN Link Type options for some restrictions
when configuring this parameter.
Action
Receive from Ethernet I
BreezeACCESS EZ AU-EZ
Table 4-8: VLAN Management Port Functionality
Management Port - Internal
Tagged frames, matching VID-M Untagged
frames when VID-M=65535
97
Menus and Parameters
System Manual
Advertisement
Table of Contents
