Table of Contents
Advertisement
Chapter 4 - Operation and Administration
4.2
Menus and Parameters
NOTE
AU-EZ is a member of the BreezeACCESS-VL family. Certain parameters available in the Monitor
program are applicable only for BreezeACCESS-VL units. These parameters are marked
accordingly in this manual.
The following sections describe the menus and parameters provided by the
Monitor program.
4.2.1
Main Menu
The Main Menu enables to access the following menus, depending on your access
level, as described in
Info Screens: Provides a read only display of current parameter values.
Available at all access levels.
Unit Control: Enables to access general operations, such as resetting the
unit, reverting to factory default parameters, changing passwords and
switching between software versions. Available at the Installer and
Administrator access levels.
Basic Configuration: Enables to access the set of parameters that are
configured during the installation process. These parameters are also available
in the Advanced Configuration menu. Available at the Installer and
Administrator access levels.
Site Survey: Enables to activate certain tests and view various system
counters. Available at the Installer and Administrator access levels.
Advanced Configuration: Enables to access all system parameters, including
the Basic Configuration parameters. Available only at the Administrator access
level.
4.2.2
Info Screens Menu
The Info Screens menu enables you to view the current values of various
parameter sets. The parameter sets are identical to the main parameter groups in
the configuration menus. You can view a specific parameter set or choose to view
all parameters at once. While this menu is available at all access levels, some
BreezeACCESS EZ AU-EZ
Section
4.1.
36
Menus and Parameters
System Manual
Advertisement
Table of Contents
