Table of Contents
Advertisement
Chapter 4 - Operation and Administration
Feature Upgrade
SW Version Download
Configuration File Upload/Download
4.2.3.1
Reset Unit
The option enables resetting the unit. After reset, any modifications made to the
system parameters are applied.
4.2.3.2
Default Settings
The Set defaults submenu enables resetting the system parameters to a
predefined set of defaults or saving the current configuration as the set of
Operator Defaults.
The Default Setting options are available only to users with Administrator access
rights.
The available options are:
Set Defaults
Save Current Configuration As Operator Defaults
4.2.3.2.1
Set Defaults
The Set Defaults submenu enables reverting the system parameters to a
predefined set of defaults. There are two sets of default configurations:
A
Factory Defaults: This is the standard default configuration.
Operator Defaults: Operator Defaults configuration can be defined by the
B
Administrator using the Save Current Configuration As Operator Defaults
option in this menu. It may also be defined at the factory according to specific
operator's definition. The default Operator Defaults configuration is the
Factory Defaults configuration.
The current configuration file and the Operator Defaults configuration file can be
uploaded/downloaded by the unit using FTP. For more information, see
Section 4.2.3.12
using TFTP (see
The available options in the Set Defaults submenu are:
Set Complete Factory Defaults
BreezeACCESS EZ AU-EZ
option. These files can also be uploaded/downloaded remotely
Appendix
B).
42
Menus and Parameters
System Manual
Advertisement
Table of Contents
