Table of Contents
Advertisement
About this Manual
This manual describes the BreezeACCESS AU-EZ Broadband Wireless Access
Unit Release 5.5 and how to install, operate and manage it.
This manual is intended for technicians responsible for installing, setting up and
operating the BreezeACCESS-EZ system, and for system administrators
responsible for managing the system.
This manual contains the following chapters and appendices:
Chapter 1 - System description: Describes the BreezeACCESS-EZ system and
its components.
Chapter 2 - Installation: Describes how to install the system components.
Chapter 3 - Commissioning: Describes how to configure basic parameters and
validate unit operation.
Chapter 4 - Operation and Administration: Describes how to use the AU-EZ
Monitor application for configuring parameters, checking system status and
monitoring performance.
Appendix A - Software Version Loading Using TFTP: Describes how to load a
new software version using TFTP.
Appendix B - File Download and Upload Using TFTP: Describes how to
download and upload configuration files using TFTP. This procedure is also
applicable for uploading country code and feature license files.
Appendix C - Using the Set Factory Defaults Utility: Describes how to use the
Set Factory Defaults utility to enable management access to units where
wrong or unknown configuration disables regular access to the unit for
management purposes.
Appendix D - Preparing the indoor to outdoor cable: Provides details on
preparation of the indoor to outdoor Ethernet cable.
BreezeACCESS EZ AU-EZ
About this Manual
xiii
System Manual
Advertisement
Table of Contents
