Table of Contents
Advertisement
Chapter 4 - Operation and Administration
Show Log File Configuration
4.2.3.9.1
Event Log Minimum Severity
The Event Log Minimum Severity parameter determines the minimal severity
level. All events whose severity is equal to or higher than the defined severity are
logged.
Valid values are: Message (MSG) Level, Warning (WRN) Level, Error (ERR) Level,
Fatal (FTL) Level, Log None.
The default selection is Warning Level severity.
4.2.3.9.2
Display Event Log
The Display Event Log option enables viewing how many events are logged and
selecting the number of events to be displayed (up to 1000). The display of each
event includes the event time (elapsed time since last reset), the severity level and
a message string. The events are displayed according to the time at which they
were generated, with the most recent event displayed last (first in - first out).
4.2.3.9.3
Erase Event Log
The Erase Event Log option enables clearing the event log.
4.2.3.9.4
Event Log Upload
The Event Log Upload submenu enables the optional uploading of the event log
file to a remote FTP server. The Event Log Upload submenu includes the following
options:
FTP Event Log Upload Execute: The FTP event Log Upload Execute executes
the upload of the Event Log file according to the parameters defined below.
Event Log Destination Directory: The Event Log Destination Directory
enables defining the destination directory for the Event Log File.
Valid values: A string of up to 80 printable ASCII characters. To clear the field
press "."
The default is an empty string.
Event Log File Name: The Event Log File Name option enables defining the
name of the event log file to be uploaded.
Valid values: A string of up to 20 printable ASCII characters.
The default is logfile.log.
BreezeACCESS EZ AU-EZ
48
Menus and Parameters
System Manual
Advertisement
Table of Contents
