Nibe SMO 40 Installer Manual page 2

Quick guide
Navigation
Ok button (confirm/select)
Back button (back/undo/exit)
Control knob (move/increase/reduce)
A detailed explanation of the button functions can be found on
How to scroll through menus and make different settings is described on
Set the indoor climate
INDOOR CLIMATE
HOT WATER
MY INSTALLATION INFO
The mode for setting the indoor temperature is accessed by pressing the OK button twice, when in the start
mode in the main menu.
Increase hot water volume
1X
INDOOR CLIMATE
MY INSTALLATION
To temporarily increase the amount of hot water (if a hot water heater is installed to your SMO 40), first turn
the control knob to mark menu 2 (water droplet) and then press the OK button twice.
2X
HOT WATER
2X
INFO
page 37.
page 39.