Advantech PCA-6143P User Manual page 85

99 Any initialization required after optional ROM test over.
Going to setup timer data area and printer base address.
9A Return after setting timer and printer base address.
Going to set the RS-232 base address.
9B Returned after RS-232 base address.
Going to do any initialization before coprocessor test.
9C Required initialization before coprocessor is over.
Going to initialize the coprocessor next.
9D Coprocessor initialized.
Going to do any initialization after coprocessor test.
9E Initialization after coprocessor test is complete.
Going to check extended keyboard
9F Extended keyboard check is done
A0 Keyboard ID command issued.
Keyboard ID flag to be reset.
A1 keyboard ID flag reset.
Cache memory test to follow.
A2 Cache memory test over.
Going to display any soft errors.
A3 Soft error display complete.
Going to set the keyboard typematic rate.
A4 Keyboard typematic rate set.
Going to program memory wait states.
A5 Memory wait states programming over.
Screen to be cleared next.
A6 Screen cleared.
Going to enable parity and NMI.
A7 NMI and parity enabled.
Going to do nay initialization required before giving control
to optional ROM at E000.
A8 Initialization before E000 ROM control over.
E000 ROM to get control next.
A9 Returned from E000 ROM control.
Going to do any initialization required after E000 optional
ROM control.
AA Initialization after E000 optional ROM control is over.
Going to display the system configuration.
00 System configuration is displayed.
Going to give control to INT 19h boot loader.
Appendix F AMI BIOS error codes 85