Advantech PCA-6143P User Manual page 81

29 Monochrome mode setting is done.
Going for Color mode setting.
2A Color mode setting is done.
About to go for toggle parity before optional ROM test.
2B Toggle parity over.
About to give control for nay setup required before optional
video ROM check.
2C Processing before video ROM control is done.
About to look for optional video ROM and give control.
2D Optional video ROM control is done.
About to give control to do any processing after video ROM
returns control.
2E Return from processing after the video ROM control.
If EGA/VGA not found then do display memory R/W test.
2F EGA/VGA not found.
Display memory R/W test about to begin.
30 Display memory R/W test passed.
About to look for the retrace checking.
31 Display memory R/W test or retrace checking failed.
About to do alternate Display memory R/W test.
32 Alternate Display memory R/W test passed.
About to look for the alternated display retrace checking.
33 Video display checking over.
Verification of display type with switch setting and actual
card to begin.
34 Verification of display adapter done.
Display mode to be set next.
35 Display mode set complete.
BIOS ROM data area about to be checked.
36 BIOS ROM data area check over.
Going to set cursor for power on message.
37 Cursor setting for power on message is complete.
Going to display the power on message.
38 Power on message display complete.
Going to read new cursor position.
39 New cursor position read and saved.
Going to display the reference string.
3A Reference string display is over.
Going to display the Hit ESC message.
3B Hit ESC message displayed.
Virtual mode memory test about to start.
Appendix F AMI BIOS error codes 81