Advantech PCA-6143P User Manual page 83

52 Memory test above 1 M complete.
Going to prepare to go back to real mode.
53 CPU registers are saved including memory size.
Going to enter in real mode.
54 Shutdown successful, CPU in real mode. Going to restore
registers saved during preparation for shutdown
55 Registers restored.
Going to disable gate A20 address line.
56 A20 address line disable successful.
BIOS ROM data area about to be checked.
57 BIOS ROM data area check halfway.
BIOS ROM data area check to be complete.
58 BIOS ROM data area check over.
Going to clear Hit ESC message.
59 Hit <ESC> message cleared. WAIT... message displayed.
About to start DMA and interrupt controller test.
60 DMA page register test passed.
About to verify from display memory.
61 Display memory verification over.
About to go for DMA #1 base register test.
62 DMA #1 base register test passed.
About to go for DMA #2 base register test.
63 DMA #2 base register test passed.
About to go of BIOS ROM data area check.
64 BIOS ROM data area check halfway.
BIOS ROM data area check to be complete.
65 BIOS ROM data area check over.
About to program DMA unit 1 and 2.
66 DMA unit 1 and 2 programming over.
About to initialize 8259 interrupt controller.
67 8259 initialization over.
About to start keyboard test.
80 Keyboard test started. Clearing output buffer, checking for
stuck key. About to issue keyboard reset command
81 Keyboard reset error/stuck key found.
About to issue keyboard controller interface test command.
82 keyboard controller interface test over.
About to check for lock-key.
83 Command byte written. Global init done.
About to check for lock-key
Appendix F AMI BIOS error codes 83