Advantech PCA-6143P User Manual page 14

The following table lists the connectors on the PCA-6143P. See
Chapter 1 (page 5) for help with locating the connectors.
Component
HDD (IDE) connector
FDD connector
Parallel port
PC/104 connector
Keyboard connectors
Reset switch connector
Power LED and keylock connector
HDD LED connector
Turbo switch connector
Turbo LED connector
External speaker connector
SBC power connector
RS-232 serial port
RS-232/422/485 serial port
The following sections tell how to make each connection. In most
cases you will simply need to connect a standard cable. If you need
to make your own cables, you can find pin assignments for the
more complicated connectors in Appendix D.
Warning! Always completely disconnect the power cord
Caution! Always ground yourself to remove any static
14 PCA-6143P User's Manual
from your chassis whenever you are working on
it. Do not make connections while the power is
on, sensitive electronic components can be
damaged by the sudden rush of power. Only
experienced electronics personnel should open
the PC chassis.
charge before touching the CPU card. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis.
Label Page
CN1 16
CN2 15
CN3 16
CN4, CN5 61
J1, J3 17
JP7 17
JP9 18
JP1 18
JP12 18
JP13 19
JP10 19
J2 19
COM1 20
COM2 21