Advantech PCA-6143P User Manual page 76

C: drive failure
The BIOS cannot get any response from hard disk drive C:. You
may need to replace the disk.
CMOS battery state low
The battery used to stored the CMOS values appears to be low.
CMOS checksum failure
After the CMOS values are saved, a checksum value is generated
to provide for error checking. If the previous value is different
from the value currently read, this message appears. To correct this
error, you should run the BIOS Setup Program.
CMOS display type mismatch
The type of video stored in CMOS does not match the type
detected by the BIOS. Run the BIOS Setup Program to correct this
error.
CMOS memory size mismatch
If the BIOS finds the amount of memory on your motherboard to
be different from the amount indicated in the CMOS it generates
this message. Run the BIOS Setup Program to correct this error.
CMOS system options not set
The values stored in CMOS are either corrupt or nonexistent. Run
the BIOS Setup Program to correct this error.
CMOS time and date not set
Run Standard CMOS Setup in the BIOS setup program to set the
date and time in the CMOS.
D: drive error
The BIOS is not receiving any response from hard disk D:. Check
the type of hard disk selected in the Standard CMOS Setup of the
BIOS Setup Program to see if the correct hard You may need to
run the Hard Disk Utility to correct this problem.
D: drive failure
The BIOS cannot get any response from hard disk drive D:. You
may need to replace the disk.
76 PCA-6143P User's Manual