Advantech PCA-6186VE User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Computer Hardware
  5. PCA-6186VE
  6. User manual

Advantech PCA-6186VE User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
sales@artisantg.com
artisantg.com
(217) 352-9330 |
|
Click HERE
Find the Advantech PCA-6186VE at our website:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCA-6186VE and is the answer not in the manual?

Questions and answers

Related Manuals for Advantech PCA-6186VE

Summary of Contents for Advantech PCA-6186VE

  • Page 1 (217) 352-9330 | Click HERE Find the Advantech PCA-6186VE at our website:...
  • Page 2 PCA-6186 Full-size socket 478 Intel Pentium® 4/ Celeron™ processor-based PCI/ISA CPU card User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 3 Copyright Notice This document is copyrighted, 2002, by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improve- ments to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmit- ted in any form or by any means without the prior written permission of Advantech Co., Ltd.
  • Page 4 Advantech equipment is destined for the laboratory or the factory floor, you can be assured that your product will provide the reliability and ease of operation for which the name Advantech has come to be known. Your satisfaction is our primary concern. Here is a guide to Advantech’s customer services.
  • Page 5 PCA-6186 series comparisoin table Model PCA- PCA- PCA- PCA- PCA- 6186LV- 6186VE- 6186E2- 6186VG- 6186G2- 00A1 00A1 00A1 00A1 00A1 CPU: Single socket 478 Intel® Pentium® 4/ Celeron™ 845GL 845G 845G 845G 845G Chipset Front Side Bus 400/533 400/533 400/533 400/533 System chipset: 845GL...
  • Page 6 Advantech assumes no liability under the terms of this warranty as a consequence of such events. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
  • Page 7 Initial Inspection Before you begin installing your card, please make sure that the following materials have been shipped: • PCA-6186 Pentium ® 4/Celeron™ processor-based single board com- puter • 1 PCA-6186 Startup Manual • 1 CD with driver utility and manual (in PDF format) •...

  • Page 8: Table Of Contents

    Contents Chapter 1 Hardware Configuration .........2 Introduction ............... 2 Features ................3 Specifications ..............4 1.3.1 System................4 1.3.2 Memory................4 1.3.3 Input/Output..............4 1.3.4 VGA interface..............5 1.3.5 Ethernet LAN..............5 1.3.6 Industrial features ............5 1.3.7 Mechanical and environmental specifications....5 Jumpers and Connectors............
  • Page 9 USB Ports (CN6, CN31, and CN32)....... 18 VGA Connector (CN7) ........... 18 10/100Base-T Ethernet Connectors (CN8 and CN34)..19 Serial Ports (CN9: COM1; CN10: COM2) ..... 19 PS/2 Keyboard and Mouse Connectors (CN11 and CN33) ............20 2.10 External Keyboard Connector (CN12)......20 2.11 Infrared (IR) Connector (CN13) ........
  • Page 10 3.4.12 Security Option ............. 32 3.4.13 APIC Mode ..............32 3.4.14 MPS Version Control For OS........32 Advanced Chipset Features..........33 Figure 3.4:Advanced chipset features screen ....33 3.5.1 DRAM Timing Selectable ..........33 3.5.2 CAS Latency Time ............33 3.5.3 Active to Precharge Delay ..........
  • Page 11 3.7.1 Power-Supply Type ............. 38 3.7.2 ACPI function ............... 38 3.7.3 Power Management ............39 3.7.4 Video Off In Suspend ..........39 3.7.5 Modem Use IRQ............39 3.7.6 HDD Power Down............39 3.7.7 Soft-Off by PWR-BTTN ..........39 3.7.8 CPU THRM-Throttling..........39 3.7.9 PowerOn By LAN ............
  • Page 12 and 82562/82551) ................ 55 Windows NT Drivers Setup Procedure (Intel 82540)..61 Windows NT Wake-on-LAN Setup Procedure....64 Chapter 7 USB 2.0 Configuration........68 Introduction ..............68 Features ................68 Installation........68 Chapter 8 Ultra ATA Storage Driver Setup....76 Introduction ..............76 Features ................
  • Page 13 Table B-8:Keyboard and mouse connector (CN11) .. 109 External Keyboard Connector (CN12)......109 Table B-9:External keyboard connector (CN12)..109 B.10 IR Connector (CN13)............ 110 Table B-10:IR connector (CN13) ......110 B.11 CPU Fan Power Connector (CN14) ......110 Table B-11:CPU fan power connector (CN14) ..110 B.12 Power LED and Keyboard Lock (CN16)......
  • Page 14 General Information This chapter gives background infor- mation on the PCA-6186. It then shows you how to configure the card to match your application and prepare it for installation into your PC. Sections include: • Introduction • Features • Specifications •...

  • Page 15: Chapter 1 Hardware Configuration

    Chapter 1 Hardware Configuration 1.1 Introduction Advantech's PCA-6186 full-size CPU card is designed with Intel 845G chipset and supports socket 478 Pentium 4/Celeron processor (FSB 400/ 533MHz) up to 2.4GHz and above. In addition to high-speed processor, PCA-6186 supports up to 2GB DDR memory with 2 DIMM socket on board.

  • Page 16: Features

    1.2 Features Fan status monitoring and alarm: To prevent system overheating and damage, the CPU fan can be monitored for speed and failure. The fan is set for its normal RPM range and alarm thresholds. Temperature monitoring and alert: To prevent system overheat- ing and damage, the CPU card supports processor thermal sensing and auto-protection.

  • Page 17: Specifications

    More: • Power On by Alarm: Powers up your computer at a certain time. • Virus warning: During and after system boot-up, any attempt to write to the boot sector or partition table of the hard disk drive will halt the sys- tem.

  • Page 18: Vga Interface

    • Keyboard and PS/2 mouse connector: One 6-pin mini-DIN connector is located on the mounting bracket for easy connection to a keyboard or PS/2 mouse. An onboard keyboard pin header connector is also avail- able • USB port: Supports up to six USB 2.0 and transmission rate up to 480Mbps.

  • Page 19: Jumpers And Connectors

    1.4 Jumpers and Connectors Connectors on the PCA-6186 board link it to external devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application. The tables below list the function of each of the board jumpers and con- nectors.
  • Page 20 Table 1.2: Connectors CN19 HDD LED connector CN20 ATX feature connector CN21 ATX soft power switch CN22 HW Monitor Alarm Close: Enable OBS Alarm Open: Disable OBS Alarm CN27 Extension I/O board connector CN28 Extension I/O board connector CN29 SM BUS Connector PIN1: SMB_DATA PIN2: SMB_CLOCK CN31...

  • Page 21: Board Layout: Jumper And Connector Locations

    1.5 Board Layout: Jumper and Connector Locations Figure 1.1: Jumper and connecter locations PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 22 Figure 1.2: Extension I/O daughter board (for PCA-6186E2-00A1) Figure 1.3: Extension I/O daughter board (for PCA-6186G2-00A1) Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 23: Safety Precautions

    1.6 Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronics personnel should open the PC chassis.

  • Page 24: Cmos Clear (J1)

    OFF) a jumper, you remove the clip. Sometimes a jumper consists of a set of three pins, labeled 1, 2, and 3. In this case you connect either pins 1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when setting jumpers.

  • Page 25: System Memory

    Table 1.4: Watchdog timer output (J2) Function Jumper Setting IRQ11 1-2 closed * Reset 2-3 closed * default setting Note: The interrupt output of the watchdog timer is a low level signal. It will be held low until the watchdog timer is reset. 1.8 System Memory The top-left edge of the PCA-6186 contains two sockets for 184-pin dual in-line memory modules (DIMMs).

  • Page 26: Sample Calculation: Dimm Memory Capacity

    1.8.1 Sample calculation: DIMM memory capacity Suppose you install a 512 MB DIMM into your PCA-6186's socket 1 and a 512 MB DIMM into sockets 2. Your total system memory is 1 GB, cal- culated as follows: Table 1.6: DIMM memory capacity sample calculation Socket number 184-pin DIMM memory Total...

  • Page 27: Cpu Installation

    (socket 478) Note: Slim Heatsink & Fan is available from Advan- tech. Part number is 1759252100. Please contact with Advantech's sales representitive if needed. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 28: Chapter 2 Connecting Peripherals

    Connecting Peripherals This chapter tells how to connect peripherals, switches, and indicators to the PCA-6186 board. Chapter 2 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 29: Introduction

    Chapter 2 Connecting Peripherals 2.1 Introduction You can access most of the connectors from the top of the board while it is installed in the chassis. If you have a number of cards installed or have a packed chasis, you may need to partially remove the card to make all the connections.

  • Page 30: Floppy Drive Connector (Cn3)

    2.3 Floppy Drive Connector (CN3) You can attach up to two floppy disk drives to the PCA-6186's onboard controller. You can use 3.5" (720 KB, 1.44 MB) drives. The card comes with a 34-pin daisy-chain drive connector cable. On one end of the cable is a 34-pin flat-cable connector.

  • Page 31: Usb Ports (Cn6, Cn31, And Cn32)

    2.5 USB Ports (CN6, CN31, and CN32) The PCA-6186 provides up to six ports of USB (Universal Serial Bus) interface, which gives complete Plug & Play and hot swapping for up to 127 external devices.The USB interface complies with USB Specification Rev.

  • Page 32: 10/100Base-T Ethernet Connectors (Cn8 And Cn34)

    2.7 10/100Base-T Ethernet Connectors (CN8 and CN34) CN8 and CN34 The PCA-6186 is equipped with one or two high-performance 32-bit PCI-bus Ethernet interfaces, which are fully compliant with IEEE 802.3/u 10/100 Mbps CSMA/CD standards. Also, PCA-6186 provides the option of supporting single or dual 10/10/1000 Mbps Ethernet LANs. They are supported by all major network operating systems.

  • Page 33: Ps/2 Keyboard And Mouse Connectors (Cn11 And Cn33)

    PS/2 keyboard and a PS/2 mouse, respec- tively. CN11 can also be connected to an adapter cable (P/N: 1700060202, available from Advantech) for connecting to both a PS/2 keyboard and a PS/2 mouse. 2.10 External Keyboard Connector (CN12)

  • Page 34: Infrared (Ir) Connector (Cn13)

    2.11 Infrared (IR) Connector (CN13) This connector supports the optional wireless infrared transmitting and receiving module. This module mounts on the system case. You must configure the setting through the BIOS setup (see Chapter 3). CN13 2.12 CPU Fan Connector (CN14) CN14 If fan is used, this connector supports cooling fans of 500mA (6W) or less.

  • Page 35: Front Panel Connectors (Cn16, 17, 18, 19, 21&22)

    2.13 Front Panel Connectors (CN16, 17, 18, 19, 21&22) There are several external switches to monitor and control the PCA- 6186. CN16 2.13.1 Power LED and Keyboard Lock (CN16) CN16 is a 5-pin connector for the keyboard lock and power on LED. Refer to Appendix B for detailed information on the pin assignments.

  • Page 36: Reset (Cn18)

    2.13.3 Reset (CN18) Many computer cases offer the convenience of a reset button. Connect the wire from the reset button 2.13.4 HDD LED (CN19) You can connect an LED to connector CN19 to indicate when the HDD is active. 2.13.5 ATX soft power switch (CN21) If your computer case is equipped with an ATX power supply, you should connect the power on/off button on your computer case to CN21.

  • Page 37: Controlling The Soft Power Switch

    Users can also identify the current power mode through the system's power LED. 2.15 SM Bus Connector (CN29) This connector is reserved for Advantech's SNMP-1000 HTTP/SNMP Remote System Manager. The SNMP-1000 allows users to monitor the internal voltages, temperature and fans from a remote computer through an Ethernet network.

  • Page 38: Connecting To Snmp-1000 Remote Manager

    CPU Card 2.17 AC-97 Audio Interface The PCA-6186 provides AC-97 audio through PCA-AUDIO-00A1 mod- ule from Advantech. 2.18 Auxiliary 4-pin power connector (CN46 and CN47) To ensure the sufficiency of power supply for Pentium(R) 4 CPU card, two auxiliary 4 pin power connector are avaliable in PCA-6186. It is strongly suggested to use auxiliary 4 pin power connector for adequate power supply.
  • Page 39 PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 40: Chapter 3 Award Bios Setup

    Award BIOS Setup This chapter describes how to set the card’s BIOS configuration data. Chapter 3 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 41: Introduction

    Chapter 3 Award BIOS Setup 3.1 Introduction Award’s BIOS ROM has a built-in setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed memory (CMOS RAM) so that it retains the setup information when the power is turned off.

  • Page 42: Standard Cmos Setup

    3.3 Standard CMOS Setup Choose the “Standard CMOS Features” option from the “Initial Setup Screen” menu, and the screen below will be displayed. This menu allows users to configure system components such as date, time, hard disk drive, floppy drive, display, and memory. Figure 3.2: Standard CMOS features screen 3.3.1 CMOS RAM backup The CMOS RAM is powered by an onboard button cell battery.

  • Page 43: Advanced Bios Features

    Note: When you see "CMOS checksum error.." message appears on the screen, please wait for 5-7 seconds. Then, the system will atuo re- boot and then backup CMOS data will restore from the Flash ROM. If the "CMOS checksum error.." message appears again and again, please check to see if you need to replace a CMOS battery.

  • Page 44: Virus Warning

    3.4.1 Virus Warning If enabled, a warning message and alarm beep activates if someone attempts to write here. The commands are “Enabled” or “Disabled.” 3.4.2 L1 & L2 Cache Enabling this feature speeds up memory access. The commands are “Enabled” or “Disabled.” 3.4.3 Quick Power On Self Test This option speeds up the Power-On Self Test (POST) conducted as soon as the computer is turned on.

  • Page 45: Typematic Delay (Msec)

    3.4.11 Typematic Delay (msec) Typematic delay is the time interval between the appearance of two con- secutive characters, when holding down a key. The input values for this category are: 250, 500, 750, 1000 (msec). 3.4.12 Security Option This setting determines whether the system will boot up if the password is denied.

  • Page 46: Advanced Chipset Features

    3.5 Advanced Chipset Features By choosing the “Advanced Chipset Features” option from the “Initial Setup Screen” menu, the screen below will be displayed. This sample screen contains the manufacturer’s default values for the PCA-6186, as shown in Figure 3-4: Note: DRAM default timings have been carefully cho- sen and should ONLY be changed if data is being lost.

  • Page 47: Dram Ras# To Cas# Delay

    3.5.4 DRAM RAS# to CAS# Delay In order to improve performance, certain space in memory is reserved for ISA cards. This memory must be mapped into the memory space below 16MB. The Choice: 15M-16M, Disabled. 3.5.5 RAS# Precharge Time This controls the idle clocks after issuing a precharge command to DRAM.

  • Page 48: On-Chip Frame Buffer Size

    3.5.13 On-Chip Frame Buffer Size User can select frame buffer size. Option is 8MB and 1MB. 3.5.14 Boot Display User can select VGA controller when system is power on. The choice: Auto, PCI, AGP. PCI (external VGA card). AGP (onboard VGA con- troller).

  • Page 49: Usb Controller

    3.6.3 USB Controller Select Enabled if your system contains a Universal Serial Bus (USB) con- troller and you have USB peripherals. The choices: Enabled, Disabled. 3.6.4 USB Keyboard/Mouse Support Select Enabled if user plan to use an USB keyboard. The choice: Enabled, Disable.

  • Page 50: Uart Mode Select

    3.6.13 UART Mode Select This item allows you to select UART mode. The choices: IrDA, ASKIR, Normal. Figure 3.6: Integrated peripherals (2) 3.6.14 RxD, TxD Active This item allows you to determine the active of RxD, TxD. The Choices: “Hi, Hi,” “Lo, Lo,” “Lo, Hi,” “Hi, Lo.” 3.6.15 IR Transmission Delay This item allows you to enable/disable IR transmission delay.

  • Page 51: Epp Mode Select

    speed. “ECP” allows the parallel port to operate in bi-directional mode and at a speed faster than the maximum data transfer rate. “ECP + EPP” allows normal speed operation in a two-way mode. 3.6.19 EPP Mode Select This field allows you to select EPP port type 1.7 or 1.9. The choices: EPP1.7, 1.9.

  • Page 52: Power Management

    3.7.3 Power Management This category allows you to select the type (or degree) of power saving and is directly related to the following modes: 1. HDD Power Down 2. Suspend Mode There are four selections for Power Management, three of which have fixed mode settings.

  • Page 53: Poweron By Modem

    3.7.10 PowerOn By Modem When Enabled, an input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft off state. The choices: Enabled, Disabled. 3.7.11 PowerOn By Alarm When Enabled, your can set the date and time at which the RTC (real- time clock) alarm awakens the system from Suspend mode.

  • Page 54: Pnp/Pci Configurations

    3.8 PnP/PCI Configurations 3.8.1 PnP OS Installed Select Yes if you are using a plug and play capable operating system. Select No if you need the BIOS to configure non-boot device Figure 3.9: PnP/PCI configurations screen 3.8.2 Reset Configuration Data Default is Disable.

  • Page 55: Pc Health Status

    3.9 PC Health Status 3.9.1 CPU Warning Temperature This item will prevent the CPU from overheating. The choices: 30~120. Figure 3.10: PC health status screen 3.9.2 Current CPU Temperature This shows you the current CPU temperature. 3.9.3 Current CPUFAN Speed This shows you the current CPUFAN operating speed.

  • Page 56: Password Setting

    3.10 Password Setting To change the password: Choose the “Set Password” option from the “Initial Setup Screen” menu and press <Enter>. The screen will display the following message: Please Enter Your Password Press <Enter>. If the CMOS is good or if this option has been used to change the default password, the user is asked for the password stored in the CMOS.

  • Page 57: Exit Without Saving

    3.12 Exit Without Saving Selecting this option and pressing <Enter> lets you exit the setup program without recording any new values or changing old ones. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 58: Chapter 4 Chipset Software Installation Utility

    Chipset Software Installation Utility This utility software installs to the Win- dows INF files that outline to the oper- ating system how the components will be configured. This utility has to be installed before other drivers. Chapter 4 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 59: Before You Begin

    Chapter 4 Chipset Software Installation Utility 4.1 Before you begin To facilitate the installation of the enhanced display device drivers and utility software, you should read the instructions in this chapter carefully before you attempt installation. The device drivers for the PCA-6186 board are located on the software installation CD.

  • Page 60: Installing The Csi Utility

    • Identification of Intel ® chipset components in the Device Manager. • Integrates superior video features. These include filtered sealing of 720 pixel DVD content, and MPEG-2 motion compensation for soft- ware DVD Note: This utility is used for the following versions of Windows system, and it has to be installed before installing all the other drivers: Windows 98SE...
  • Page 61 Click "Next" when you see the following message. Click "Yes" when you see the following message. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 62 Click "Next" when you see the following message. When the following message appears, click "Finish" to complete the installation and restart Windows. Chapter 4 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 63 PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 64: Chapter 5 Agp Vga Setup

    AGP VGA Setup The PCA-6186 features an integrated AGP VGA interface. This chapter pro- vides instructions for installing the AGP VGA drivers from the driver CD included in your package. Chapter 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 65: Introduction

    Chapter 5 AGP VGA Setup 5.1 Introduction As quoted from "Intel® 845G chipset Graphics Chipset Controller Hub (GMCH) Rev. 1.0 May 2002.”: The Intel® 845G Graphics Memory Controller Hub (the 845G GMCH) is Intel’s first memory controller hub with integrated graphics for the Intel Pentium®...

  • Page 66: Installation

    tion, which uses Direct AGP to request allocation of additional memory for 3D applications, and returns the memory to the operating system when no longer required. The Intel Extreme Graphics Driver determines the size of the pre-allo- cated memory needed and will make additional Non-Local Video Mem- ory requests to achieve the amount needed for the display and application requirement.
  • Page 67 You will see a welcome window. Please chick on "Next" to con- tinue the installation. Click "Yes" when you see the following message. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 68 Click on "Yes" to continue the installation VGA driver is now installing Chapter 5 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 69 When the following message appears, you can choose to restart the computer now or later. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 70: Chapter 6 Lan Configuration

    LAN Configuration The PCA-6186 supports dual 10/ 100Base-T (or dual 10/100/1000Base- T) Ethernet networking with Intel 82562/82551 Ethernet controller (or 82540 for Gigabit LAN). This chapter gives detailed information on Ethernet configuration. It shows you how to configure the card to match your appli- cation requirements.

  • Page 71: Introduction

    Chapter 6 LAN Configuration 6.1 Introduction The PCA-6186 features the 32-bit 10/100/1000 Mbps Ethernet network interface. This interface supports bus mastering architecture and auto- negotiation features. Therefore standard twisted-pair cabling with RJ-45 connectors for 10 Mbps, 100 Mbps and 1000 Mbps connections can be used.

  • Page 72: Installation

    6.3 Installation Note: Before installing the LAN drivers, make sure the CSI utility has been installed in your system. See Chapter 4 for information on installing the CSI utility. The PCA-6186's onboard Ethernet interface supports all major network operating systems. However, the installation procedure varies with differ- ent operating systems.
  • Page 73 In the "PCI Ethernet Controller Properties" window, select the "Driver" tab. Then click on "Update Driver..." In the "Upgrade Device Driver Wizard" window, click on "Next." PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 74 In the "Upgrade Device Driver Wizard" window, select "Display for a list of known drivers for this device so that I can choose a spe- cific driver." Then click on "Next." In the following "Upgrade Device Driver Wizard" window,click on Network Adapter and then "Next".
  • Page 75 In the "Upgrate Device Driver Wizer" Window, click on "Have Disk" and then "Next". In the following "Upgrade Device Driver Wizard" window, specify the location at "D:\Drv_Lan\82540" for 10/100/1000Base-T or D:\Drv_Lan\82562 for 10/100Base-T Ethernet LAN. D:\Drv_LAN\82540 PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 76 In the following "Update Device Driver Wizard" window, choose "Intel 82540OEM Based Network Connection" and click on "Next". If your board is with 10/100Base-T Ethernet controller onboard, please choose "Intel 8255x Based Fast Ethernet Version. Chapter 6 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 77 In the following "Update Device Driver Wizard" window, click on "Next" Intel 82540 LAN driver is completed installed. Click on "Finish" to complete the intallation. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 78: Windows Nt Drivers Setup Procedure (Intel 82540)

    6.5 Windows NT Drivers Setup Procedure (Intel 82540) Note: The CD-ROM drive is designated as "D" throughout this section. From the desktop of Windows NT, click on "Start" and select "Set- tings." Then click on the "Control Panel" icon to select "System." In the "Network"...
  • Page 79 In the "Select Network Adapter" window, click on "Have Disk..." When the "Insert Disk" window appears, insert the driver CD into the CD-ROM drive and type in D:\Drv_Lan\82540. When you have the correct file path, click on "OK." PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ...
  • Page 80 In the "Select OEM Option" window, select Intel Pro 1000 Family Adapter and click on "OK" In the "Network" window, select the "Adapters" tab. Under "Net- work Adapters," highlight "[1] Intel® PRO/1000MT Network Con- nection Management Adapter" and "[2] Intel® PRO/1000 MT Network Connection."...

  • Page 81: Windows Nt Wake-On-Lan Setup Procedure

    6.6 Windows NT Wake-on-LAN Setup Procedure From the desktop of Windows NT, click on "Start" and select "Set- tings." Then click on the "Control Panel" icon to select "System." In the "Intel(R) PROSet" window, under "Select a Network Adapter," choose "[2] Intel(R) PRO100+ Management Adapter." Then select the "Advanced"...
  • Page 82 In the "Reboot Required" window, click on "Yes." Chapter 6 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 83 PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 84: Chapter 7 Usb 2.0 Configuration

    USB 2.0 Configuration The PCA-6186 supports USB 2.0 device. From this chapter, you will find detail informaiton regarding Windows 2000 USB 2.0 driver setup procedure. Chapter 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 85: Introduction

    Chapter 7 USB 2.0 Configuration 7.1 Introduction The PCA-6186 is designed with Intel ICH4 which supports both USB1.1 and USB 2.0 high-speed transmission. It still remains the compatibility with today's USB device. High-speed USB 2.0 provides data transfer up to 480Mb/s which is 40 times faster than USB 1.1. It is ideal for today's speed-demanding I/O peripherals.
  • Page 86 1. From Windows 2000, select Start and click on Setting. In the window of Setting, click on icon System. Choose the option "Hardware", and then click on "Device Man- ager" Chapter 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 87 In Device Manager, choose "USB Controller" and then double click. Choose the option "Driver" and then click on "Update Driver". PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 88 In Upgrade Device Driver Wizar, click on "Next". In Upgrade Device Wizard, choose "search for a suitable device for my driver" and then click on " Next". Chapter 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 89 Tick "Specify a location" and click "Next" In the following windows, please specify the location "D:\Drv_USB\w2k" and then click on "OK". PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 90 In the following window, please click on "Finish" to complete USB driver installation. Chapter 7 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 91 PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 92: Chapter 8 Ultra Ata Storage Driver Setup

    Ultra ATA Storage Driver Setup This driver must be installed to use the Intel ® Ultra ATA controller to improve storage subsystem performance and overall system performance. Chapter 8 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 93: Introduction

    Chapter 8 Ultra ATA Storage Driver Setup 8.1 Introduction This driver takes advantage of the latest Intel ® Ultra ATA controller fea- tures to improve both storage subsystem performance and overall system performance. A useful diagnostic tool, Intel Ultra ATA Companion® , shows technical information of the ATA subsystem.

  • Page 94: Window 2000 Setup Procedure

    8.3 Window 2000 Setup Procedure 1RWH %HIRUH LQVWDOOLQJ WKLV GULYHU PDNH VXUH WKH &6, XWLOLW\ KDV EHHQ LQVWDOOHG LQ \RXU V\VWHP 6HH &KDSWHU  IRU LQIRUPDWLRQ RQ LQVWDOOLQJ WKH &6, XWLOLW\ Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure.
  • Page 95 Click on "Next" when you see the following message. When you see the following message, click on "Yes" to accept the License Agreement. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 96 Click on "Next" when you see the following message. When the following message appears, click "Finish" to complete the installation and restart Windows. Chapter 8 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 97: Displaying Driver Information

    8.4 Displaying Driver Information From the desktop of Windows, click on "Start" and select "Pro- grams." Then select "Intel Ultra ATA Storage Driver" and then "Companion." Click on the "Device Parameters" or the "Storage Report" tab to view related information. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ...

  • Page 98: Nt Setup Procedure

    8.5 NT Setup Procedure Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure. Under the "IDE DRIVERS" heading, click on the "Install" button. Chapter 8 Artisan Technology Group - Quality Instrumentation ...
  • Page 99 Click on "Next" when you see the following message. When you see the following message, click on "Yes" to accept the License Agreement. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 100 When the following message appears, click "Finish" to complete the installation and restart Windows. Chapter 8 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 101 PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 102: Chapter 9 Onboard Security Setup

    Onboard Security Setup This chapter explains OBS concepts and provides instructions for installing the relevant software drivers. This is done using the driver CD included in your PCA-6186 package. Chapter 9 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 103: Introduction

    Chapter 9 Onboard Security Setup 9.1 Introduction The PCA-6186's hardware monitor is designed with Winbond W83782D. Onboard security (OBS) functions monitor key hardware. They help you maintain your system's stability and durability. The PCA-6186 can moni- tor 5 sets of system positive voltages, 2 sets of system negative voltages, CPU cooling fan speed, and CPU temperature.

  • Page 104: Windows 9X Drivers Setup Procedure

    9.2 Windows 9X Drivers Setup Procedure Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure. Click on the "WIN 9X" button under the "OBS DRIVERS" heading. When you will see the following message, make sure you have closed all other programs, then click on "OK."...
  • Page 105 Click on the square graphics button when you see the following message. When you see the following message, click on "OK" to complete the installation. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 106: Windows 2000/Nt Drivers Setup Procedure

    9.3 Windows 2000/NT Drivers Setup Procedure Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure. Click on the "WIN NT" button under the "OBS DRIVERS" heading. Chapter 9 Artisan Technology Group - Quality Instrumentation ...
  • Page 107 Click "Next" when you see the following message. Click "Next" when you see the following message. PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 108 Click "Next" when you see the following message. Click "Finish" when you see the following message. Chapter 9 Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 109: Using The Obs Hardware Doctor Utility

    Click "OK" to restart Windows. 9.4 Using the OBS Hardware Doctor Utility After completing the setup, all the OBS functions are permanently enabled. When a monitored reading exceeds safe limits, a warning mes- sage will be displayed and an error beep tone will activate to attract your attention.
  • Page 110 From the desktop of Windows, click on "Start" and select "Pro- grams" and then "OBS Hardware Doctor." It is recommended that you load the default values for all the OBS settings. However, if desired, you can establish new conditions for voltage, fan speed, and temperature.
  • Page 111 PCA-6186 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 112: Appendix A Programming The Watchdog Timer

    Programming the Watchdog Timer The PCA-6186 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason. This feature ensures system reliability in industrial standalone or unmanned environments. Appendix A Artisan Technology Group - Quality Instrumentation ...

  • Page 113: Programming The Watchdog Timer

    Appendix A Programming the watchdog timer A.1 Programming the Watchdog Timer The PCA-6186's watchdog timer can be used to monitor system software operation and take corrective action if the software fails to function after the programmed period. This section describes the operation of the watchdog timer and how to program it.
  • Page 114 Unlock W83627H Select register of watchdog timer Enable the function of the watchdog timer Use the function of the watchdog time Lock W83627HF Appendix A Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...
  • Page 115 Watchdog Timer Registers Address of register (2E) Attribute Read/Write Value (2F) and description 87 (hex) ----- Write this address to I/O address port 2E (hex) twice to unlock theW83627HF 07 (hex) write Write 08 (hex) to select reg- ister of watchdog timer. 30 (hex) write Write 01 (hex) to enable the...

  • Page 116: Example Program

    F7 (hex) read/write Bit 6: Write 1 to enable key- board to reset the timer, 0 to disable.[default] Bit 5: Write 1 to generate a timeout signal immediately and automatically return to 0. [default=0] Bit 4: Read status of watch- dog timer, 1 means timer is ""time out""."...
  • Page 117 ;----------------------------------------------------------- Dec dx ; Set second as counting unit Mov al,0f5h Out dx,al al,dx And al,not 08h Out dx,al ;----------------------------------------------------------- Dec dx ; Set timeout interval as 10 seconds and start counting Mov al,0f6h Out dx,al Mov al,10 Out dx,al ;----------------------------------------------------------- Dec dx ;...
  • Page 118 ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ; Set minute as counting unit Mov al,0f5h Out dx,al al,dx Or al,08h Out dx,al ;----------------------------------------------------------- Dec dx ; Set timeout interval as 5 minutes and start counting Mov al,0f6h Out dx,al Mov al,5...
  • Page 119 Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer Out dx,al Mov al,08h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable watchdog timer to be reset by mouse Mov al,0f7h Out dx,al al,dx...
  • Page 120 Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer Out dx,al Mov al,08h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable watchdog timer to be strobed reset by keyboard Mov al,0f7h Out dx,al al,dx...
  • Page 121 Out dx,al ;----------------------------------------------------------- Mov al,07h ; Select registers of watchdog timer Out dx,al Mov al,08h Out dx,al ;----------------------------------------------------------- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx ; Generate a time-out signal Mov al,0f7h Out dx,al ;Write 1 to bit 5 of F7 register...
  • Page 122 I/O Pin Assignments This appendix contains information of a detailed or specialized nature. It includes: • IDE Hard Drive Connector • Floppy Drive Connector • Parallel Port Connector • USB Connector • VGA Connector • Ethernet 10/100/1000Base-T RJ-45 Connector • Keyboard and Mouse Connector •...

  • Page 123: Appendix B Pin Assignments

    Appendix B Pin Assignments B.1 IDE Hard Drive Connector (CN1, CN2) Table B.1: IDE hard drive connector (CN1, CN2) Signal Signal IDE RESET* DATA 7 DATA 8 DATA 6 DATA 9 DATA 5 DATA 10 DATA 4 DATA 11 DATA 3 DATA 12 DATA 2 DATA 13...

  • Page 124: Floppy Drive Connector (Cn3)

    B.2 Floppy Drive Connector (CN3) Table B.2: Floppy drive connector (CN3) Signal Signal FDHDIN* FDEDIN* INDEX* MOTOR 0* DRIVE SELECT 1* DRIVE SELECT 0* MOTOR 1* DIRECTION* STEP* WRITE DATA* GND2 WRITE GATE* TRACK 0* WRITE PROTECT* READ DATA* HEAD SELECT* DISK CHANGE* * low active Chapter B...

  • Page 125: Parallel Port Connector (Cn4)

    B.3 Parallel Port Connector (CN4) Table B.3: Parallel port connector (CN4) Signal Signal STROBE* AUTOFD* INIT* SLCTINI* ACK* BUSY SLCT * low active ACP-1120 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 126: Usb Connector (Cn6)

    B.4 USB Connector (CN6) Table B.4: USB1/USB2 connector (CN6) USB1 Signal USB2 Signal +5 V +5 V Chassis GND B.5 VGA Connector (CN7) Table B.5: Table B-6: VGA connector (CN7) Signal Signal GREEN BLUE H-SYNC V-SYNC Chapter B Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 127: Com1/Com2 Rs-232 Serial Port (Cn9, Cn10)

    B.6 Ethernet 10/100Base-T RJ-45 Connector (CN8, CN34) CN8 and CN34 Table B.6: Ethernet 10/100Base-T RJ-45 connector (CN8, CN34) Signal Signal XMT+ XMT- RCV- RCV+ B.7 COM1/COM2 RS-232 Serial Port (CN9, CN10) Table B.7: COM1/COM2 RS-232 serial port (CN9, CN10) Signal ACP-1120 User’s Manual Artisan Technology Group - Quality Instrumentation ...

  • Page 128: Keyboard And Mouse Connnector (Cn11)

    B.8 Keyboard and Mouse Connnector (CN11) Table B.8: Keyboard and mouse connector (CN11) Signal KB DATA MS DATA KB CLOCK MS CLOCK B.9 External Keyboard Connector (CN12) Table B.9: External keyboard connector (CN12) Signal DATA Chapter B Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 129: Ir Connector (Cn13)

    B.10 IR Connector (CN13). Table B.10: IR connector (CN13) Signal Signal +5 V IR_RX IR_TX B.11 CPU Fan Power Connector (CN14) Table B.11: CPU fan power connector (CN14) Signal +12 V Detect ACP-1120 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 130: Power Led And Keyboard Lock (Cn16)

    B.12 Power LED and Keyboard Lock (CN16) You can use an LED to indicate when the CPU card is on. Pin 1 of CN16 supplies the LED's power, and Pin 3 is the ground. Table B.12: Power LED and keylock connector (CN16) Function LED power (+5 V) Keyboard Lock...

  • Page 131: Reset Connector (Cn18)

    B.14 Reset Connector (CN18) Table B.14: Reset connector (CN18) Signal RESET B.15 HDD LED Connector (CN19) Table B.15: HDD LED connector (CN19) Signal Vcc(LED+) LED0 (LED-) ACP-1120 User’s Manual Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 132: Atx Feature Connector (Cn20)

    B.16 ATX Feature Connector (CN20) Table B.16: ATX feature connector (CN20) Signal PS-ON VCCSB B.17 ATX Soft Power Switch (CN21)) Table B.17: ATX soft power switch (CN21) Signal 5VSB PWR-BTN B.18 H/W Monitor Alarm (CN22) Table B.18: H/W monitor alarm (CN22) Signal Enable OBS alarm Disable OBS alarm...

  • Page 133: Extension I/O Board Connector (Cn27)

    B.19 Extension I/O Board Connector (CN27) Table B.19: Extension I/O board connector (CN27) Signal Signal D+ (USB3) D- (USB1) D+ (USB2) D- (USB0) D- (USB3) Vcc (USB1) D- (USB2) Vcc (USB0) Vcc (USB3) GND (USB1) Vcc (USB2) GND (USB0) GND (USB3) 5VSB GND (USB2) ACT LED (LAN2)

  • Page 134: Sm Bus Connector (Cn29)

    B.21 SM Bus Connector (CN29) B.22 SM Bus Connector (CN 29) Signal SMB_DATA SMB_CLK B.23 PS/2 Mouse Connector (CN33) Table B.21: PS/2 mouse connector (CN33) Signal MS DATA MS CLOCK Chapter B Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com...

  • Page 135: Audio Interface (Cn43)

    B.24 AC-97 Audio Interface (CN43) Table B.22: System I/O ports 1 VCC 2 GND 3 SYNC 4 BITCLK 5 SDOUT 6 SDIN 7 SDIN2 8 -ACRST 9 +12V 10 GND B.25 System I/O Ports Table B.23: System I/O ports Addr. range (Hex)Device 000-01F DMA controller 020-021...

  • Page 136: Dma Channel Assignments

    378-37F Parallel printer port 1 (LPT2) 380-38F SDLC, bisynchronous 2 3A0-3AF Bisynchronous 1 3B0-3BF Monochrome display and printer adapter (LPT1) 3C0-3CF Reserved 3D0-3DF Color/graphics monitor adapter 3F0-3F7 Diskette controller 3F8-3FF Serial port 1 B.26 DMA Channel Assignments Table B.24: DMA channel assignments Channel Function Available...

  • Page 137: 1St Mb Memory Map

    IRQ3 Serial communication port 2 IRQ4 Serial communication port 1 IRQ5 Parallel port 2 IRQ6 Diskette controller (FDC) IRQ7 Parallel port 1 (print port) B.28 1st MB Memory Map Table B.26: 1st MB memory map Addr. range (Hex) Device F0000h - FFFFFh System ROM C8000h - EFFFFh Unused...

This manual is also suitable for:

Pca-6186

Table of Contents