Setup Requirements; What's In The Box; What You Need - Angelcare AC327 Owner's Manual

Hide thumbs Also See for AC327:
Table of Contents

Advertisement

be easily accessible. Make sure to plug the adapter
to the socket outlet nearest to the equipment and
that is easily accessible. To disconnect from mains,
unplug the adapter
41. Only use attachments/accessories
and replacement parts specified by the
manufacturer. Any mounting of the product
should follow the manufacturer's instructions
• DO NOT position this product on an unstable cart,
stand, tripod, bracket or table. The product may fall,
causing serious injury to a child or adult and serious
damage to the product
• Use ONLY the stand sold with the product
• Be sure replacement parts are supplied by Angelcare
and have the same characteristics as original
part. Unauthourised substitution may result in fire,
electric shock or fire
42. Unplug this appliance during lightning storms
or when not used for long periods of time
SET UP REQUIREMENTS

WHAT'S IN THE BOX

Nursery Unit
1
Stand (for Nursery Unit)
2
2 x AC Adapters
3
Parent Unit
4
Lithium Ion Battery pack
5
(for Parent Unit)
Sensor Pad (on model AC327
6
and AC337)
CR2450 Battery (for Sensor Pad)
7
(on model AC327 and AC337)
Hardware (for wall mounting)
8

WHAT YOU NEED

Hardboard, if the crib does not have
a firm surface
(see specification on STEP 2)
4
CFO_ANGE_Manuel_AC327_NA.indd 4
43. Servicing - DO NOT attempt to service
this product yourself as opening or removing
covers (except battery door) may expose you
to dangerous voltage or other hazards
• Power Supply – see Technical Specification within
this guide
44. Overloading - DO NOT overload wall outlets,
extension cords or integral convenience
receptacles as this can result in a risk of fire or
electric shock
45. Nursery Unit Antenna - The antenna used
for this transmitter must be installed to provide a
separation distance of at least 8'' (20 cm) from all
persons and must not be collocated or operating in
conjunction with any other antenna or transmitter
46. Cleaning - Disconnect all units before cleaning.
DO NOT immerse any part of the monitor in water.
Clean only with a dry cloth
1
2
4
6
3
2X
5
7
8
2018-10-31 10:45 AM

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ac337Ac320

Table of Contents