Cover - Bell 206L4 Maintenance Manual

5-18. 100-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 3
DATA REFERENCE
Chapter 11
Chapter 53
ECCN EAR99
PROGRESSIVE INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
ZONE 6 — TAILBOOM
PLACARDS AND MARKINGS
1. Examine the placards, decals and markings. Ensure they
are readable, correctly applied and in agreement with the
applicable configuration of your helicopter.
TAILBOOM STRUCTURE
1. Remove and examine tail rotor driveshaft cover, and
fasteners for condition and security.
2. Remove and examine tail rotor gearbox fairings for
condition.
3. Examine anti-chafing adhesive tape (C-460) on tailboom
for condition. Replace worn or damaged tape as required.
In the event that cracks are found, contact Bell
Helicopter Textron, Product Support Engineering.
4. Examine entire tailboom for the following conditions:
a. Dents.
NOTE
25 FEB 2011 Rev. 13
BHT-206L4-MM-1
INITIAL
MECH OTHER
5-00-00
Page 33