5-29.
300-HOUR INSPECTION (CONT)
DATA REFERENCE
Chapter 96
Chapter 53
Chapter 67
Chapter 96
Chapter 52
Chapter 62
ECCN EAR99
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
d. Wiring and electrical components for condition and
security.
e. Structure for corrosion, cracks, and condition.
CONTROLS
1.
Verify minimum friction of collective control and readjust as
required.
2.
Verify minimum friction of cyclic control and readjust as
required.
3.
Verify minimum friction of control pedals and readjust as
required.
ELECTRICAL
1.
Remove battery and recondition in accordance with
BHT-ALL-SPM and manufacturer's service manual.
FUSELAGE
1.
Inspect latches on crew doors for correct adjustment.
2.
Inspect latches on passenger doors, and baggage door for
correct adjustment.
PYLON AREA
SWASHPLATE ASSEMBLY
1.
Verify and adjust swashplate tilt friction as required.
2.
Value must be between 15 to 32 pounds (67 to 142 N). If
out of limits, adjust to 15 to 32 pounds (67 to 142 N) and check
again.
BHT-206L4-MM-1
INITIAL
MECH
25 FEB 2011 Rev. 13
OTHER
5-00-00
Page 87