300-Hour Inspection; Chapter 6 - Bell 206L4 Maintenance Manual

5-29.

300-HOUR INSPECTION

DATA REFERENCE
Chapter 25
Chapter 53

Chapter 67

Chapter 53
ECCN EAR99
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
Every 300 hours of operation, the 300-hour
inspection must be accomplished in conjunction with
the 100-hour airframe
program or the 100-hour airframe periodic inspection
program.
FORWARD FUSELAGE
CABIN INTERIOR
1. Remove cabin overhead upholstery, hat bin, soundproofing
blanket, aft vertical tunnel covers, and roll-over bulkhead access
panels.
2. Remove roof beam access panels.
3. Examine flight control tubes inside roof beam for condition
and security.
4. Examine roof beam and roof shell structure for condition.
5. Examine aft passenger seat bulkhead for distortion and/or
cracks and indication of screw contact in the area of hat bin
attachment nutplates.
NOTE
progressive inspection
25 FEB 2011 Rev. 13
BHT-206L4-MM-1
INITIAL
MECH OTHER
5-00-00
Page 85