Bell 206L4 Maintenance Manual page 3

BHT-206L4-MM-1
WARNING
THIS MANUAL APPLIES ONLY TO HELICOPTERS AND COMPONENTS
MAINTAINED IN ACCORDANCE WITH BELL HELICOPTER TEXTRON
(BELL) APPROVED PROCEDURES USING BELL APPROVED PARTS.
ALL INSPECTION, REPAIR AND OVERHAUL PROCEDURES PUBLISHED
BY BELL, INCLUDING PART RETIREMENT LIFE, ARE BASED SOLELY ON
THE USE OF BELL PARTS THAT HAVE BEEN MAINTAINED USING BELL
APPROVED DATA. THE DATA PUBLISHED HEREIN OR OTHERWISE
SUPPLIED BY BELL IS NOT APPLICABLE TO NON-BELL PARTS OR
PARTS THAT HAVE BEEN REPAIRED USING DATA AND/OR PROCESSES
NOT APPROVED BY BELL.
BELL IS NOT RESPONSIBLE FOR ANY PART OTHER THAN THOSE THAT
IT HAS APPROVED.
BEFORE PERFORMING ANY PROCEDURE CONTAINED IN THIS MANUAL
YOU MUST INSPECT THE AFFECTED PARTS AND RECORDS FOR
EVIDENCE OF ANY MANUFACTURE, REPAIR, REWORK OR USE OF A
PROCESS NOT APPROVED BY BELL.
IF YOU IDENTIFY OR SUSPECT THE USE OF PARTS NOT AUTHORIZED
BY BELL, EITHER REMOVE THE AFFECTED ITEM FROM THE AIRCRAFT
OR OBTAIN INSTRUCTIONS FOR CONTINUED AIRWORTHINESS FROM
THE MANUFACTURER OR THE ORGANIZATION THAT APPROVED THE
REPAIR.
Export Classification C, ECCN EAR99 25 JUN 2019 Rev. 23 Warning