60-Month Inspection - Bell 206L4 Maintenance Manual

5-36.

60-MONTH INSPECTION

DATA REFERENCE
BHT-206L4-MM
BHT-206L-CR&O
Export Classification C, ECCN EAR99
SCHEDULED INSPECTIONS
INSPECTION TASK DESCRIPTION
DATE: __________________W.O. _____________________
FACILITY: _________________ _ ________________________
HELICOPTER S/N: __________ _ ________________________
REGISTRY NO.: ____________ _ ________________________
TOTAL TIME:_______________________________________
SIGNATURE:_______________ _ ________________________
FREEWHEEL ASSEMBLY
This inspection applies to helicopters equipped with
freewheel assembly
subsequent).
Do this inspection if an overhaul of the applicable
freewheel assembly has not been accomplished in
the last 60 months.
1. Remove the freewheel assembly.
2. Disassemble the freewheel assembly.
Do not do a non-destructive inspection. It is not
necessary to remove paint from the parts.
3. Examine the parts of the freewheel assembly for condition.
4. Restore the surface finish of the damaged part(s), as
applicable.
5. Assemble the freewheel assembly.
6. Install the freewheel assembly.
NOTE
406-040-500-143
NOTE
7 JUN 2013 Rev. 18
BHT-206L4-MM-1
INITIAL
MECH OTHER
(or
5-00-00
Page 111/112