Garbage Incinerator - YOKOGAWA EXAxt ZR22G Technical Information

4.5

Garbage Incinerator

This is a facility to handle by incineration the combustible waste generally contained in municipal
garbage.
The exhaust gas of the incinerator outlet contains large quantities of dust and corrosive gases,
and a large water vapor component.
Yokogawa should be consulted concerning the installation of the unit.
Sample point
Incinerator outlet
(gas cooler outlet)
Scrubber outlet
(or stack)
Sewage Sludge
Measured Feed
Extraction Blower
Control Oil Gun
Heavy Oil
Garbage incinerator
Incinerator outlet
Exhaust gas temperature: 700 to 750°C
Dust: 20 to 30 g/Nm
Exhaust gas components: SOx;Several hundred ppm
All Right Reserved Copyright © 2004, Yokogawa Electric Corporation
System type
H2, H3
Note: depending on the conditions at the
sample point, a sampling type
system may be required.
L2, L3
Fluidized Bed Incinerator Plant
Air Preheater
3
HCl;100ppm
Detector
D1, (D3)
Cyclone
Electric
Precipitator
Hot Blast Furnace
Pressurizing Blower
Scrubber outlet
Exhaust gas temperature: 80 to 120°C
Dust: 0.1 g/Nm
<4. Applications>
Objective
D5 Combustion monitoring
Combustion monitoring
Scrubber
Denitration
Tower
Deconsolidator
Auxiliary Blower
3 maximum
TI 11M12A01-01E
4-14
Dust
F0414.ai
Mar. 14, 2017-00