Section 8 Renewal Parts; General; Ordering Instructions - Eaton Cutler-Hammer VCP-WR Series Instructions For The Use, Operation And Maintenance

Instruction Book
Page 50 Effective: February 2007
SECTION 8: RENEWAL PARTS

8-1 GENERAL

In order to minimize production downtime, it is
recommended that an adequate quantity of spare parts
be carried in stock. The quantity will vary from customer
to customer, depending upon the service severity and
continuity requirements. Each customer should develop
his own stock level based on operating experience
(Table 8.1).

8-2 ORDERING INSTRUCTIONS

For more information visit: www.EatonElectrical.com
a. Always specify the breaker rating informotion
and shop order number.
b. Describe the item, give the style number, and
specify the quantity required.
c. Specify the voltage for electrical components.
d. Specify the method of shipping desired.
e. Send all orders or correspondence to the nearest
Cutler-Hammer sales office.
I.B. 8295A61H07