Renewal Parts; General; 7-1.1 Ordering Instructions; Recommended Renewal Parts For Ansi Rated Breakers - Eaton Cutler-Hammer W-VAC Instructions For Installation, Operation And Maintenance

Page 36
SECTION 7: RENEWAL PARTS

7-1 GENERAL

In order to minimize production downtime, it is recom-
mended that an adequate quantity of spare parts be car-
ried in stock. The quantity will vary from customer to
customer, depending upon the service severity and con-
tinuity requirements. Each customer should develop his
own stock level based on operating experience. Refer to
Table 7.1 for guidance.
7.1 Recommended Renewal Parts for ANSI Rated Breakers (Continued Next Page)
LINE DESCRIPTION
NO.
Interrupter Assembly
1 360/16, 630A - 16kA
2 360/16, 1250A - 16kA
3 360/16, 1600A - 16kA
4 360/16, 2000A - 16kA
5 360/20, 630A - 20kA
6 360/20, 1250A - 20kA
7 360/20, 1600A - 20kA
8 360/20, 2000A - 20kA

7-1.1 ORDERING INSTRUCTIONS

a. Always specify the breaker rating information and
shop order number.
b. Describe the item, give the style number, and specify
the quantity required.
c. Specify the voltage for electrical components.
d. Specify the method of shipping desired
e. Send all orders or correspondence to the nearest
Cutler-Hammer sales office.
STYLE NUMBER
VCP-W
3A74801H01
3A74802H01
3A74803H01
3A74804H01
3A74807H01
3A74808H01
3A74809H01
3A74810H01
I.B. 3A74791H04
QTY
3
3
3
3
3
3
3
3
Effective 7/97