Section 7 Renewal Parts; General; Ordering Instructions - Eaton Cutler-Hammer 36W-VAC25 Instructions For Installation, Operation And Maintenance

I.B. 3A74499B
SECTION 7: RENEWAL PARTS

7-1 GENERAL

In order to minimize production downtime, it is recom-
mended that an adequate quantity of spare parts be car-
ried in stock. The quantity will vary from customer to
customer, depending upon the service severity and con-
tinuity requirements. Each customer should develop his
own stock level based on operating experience. Refer to
Table 7.1 for guidance.
Effective 11/97

7-2 ORDERING INSTRUCTIONS

a.) Always specify the breaker rating information and
shop order number.
b.) Describe the item, give the style number, and specify
the quantity required.
c.) Specify the voltage for electrical components.
d.) Specify the method of shipping desired.
e.) Send all orders or correspondence to the nearest
Cutler-Hammer sales office.
Page 35