Install The Unit - Eaton DX RT 6K UPS User Manual

3.4 Install the unit

3.4.1 RT model:
Rack position installing
This procedure is suitable for 19 inch rack cabinet installation with a
minimum of 800mm depth.
 UPS model
Identify the final position and keep '2U' space for this installing.
Note that you already installed a 'rail kit' to rack cabinet for this operation,
and '1U' rail kit is recommended to be selected.
1. Install 'Ear bracket' to the unit by the M4 screws (flat head).
2. Slide the unit into 'rail kit' and make sure tighten the 'rack mounting
screw'.
 EBM model
Identify the final position and keep '3U' space for this installing, and it is
recommended to be installed below to UPS.
Note that you already installed a 'rail kit' to rack cabinet for this operation,
and '2U' rail kit is recommended to be selected.
1. Install 'Ear bracket' to the unit by the M4 screws(flat head).
2. Slide the unit into 'rail kit' and make sure tighten the 'rack mounting
screw' .
7