Reset fault status
Clear event log
Restore factory set
Settings
Event log
Identification
5.4 User settings
The following table displays the options that can be changed by the user.
Submenu
Available settings
Password
Key the password
language
[English][Deutsch][Español]
User
[disabled] [Enabled]
password
Audible alarm
[enabled] [disabled]
Output voltage [208V] [220V] [230V] [240V]
Can be changed in Standby mode and
Bypass mode
Output
[autosensing] [50HZ][60HZ]
frequency
Power
[normal] [high efficiency] [converter]
strategy
Auto bypass
[enabled] [disabled]
Auto restart
[enabled] [disabled]
Authorize the product to restart
automatically when mains recovers after
a complete battery discharge.
Dry in
[Disabled] [SON] [SOFF] [Maintain
bypass]
Dry out
[Load powered] [On battery mode]
[Battery low] [Battery disconnected]
[Bypass output] [UPS normal]
Start on
[enabled] [disabled]
battery
Clears active fault
Clears events
Returns all settings to original values
Sets parameters
Event list
[Product type/model] / [Part/Serial number] /
[UPS/NMC firmware]
Default settings
USER
English
[disabled]
[enabled]
[230V]
[autosensing]
[normal]
[enabled]
[enabled]
[Disabled]
[Load powered]
[enabled]
22