Ups Maintenance; Equipment Care; Transporting The Ups; Storing The Equipment - Eaton DX RT 6K UPS User Manual

Installation procedure:
1. Go to the website:
http://www.ups-software-download.com/
2. Choose the operation system you need and follow the instruction described on
the website to download the software.
3. When downloading all required files from the internet, enter the serial No:
511C1-01220-0100-478DF2A to install the software.
When you finish installation, restart your computer, the WinPower software will
appear as a green plug icon located in the system tray, near the clock.

7. UPS maintenance

7.1Equipment care

For the best preventive maintenance, keep the area around the equipment clean
and dust free. If the atmosphere is very dusty, clean the outside of the system
with a vacuum cleaner.
For full battery life, keep the equipment at an ambient temperature of 25°C
(77°F).
If the UPS requires any type of transportation, verify that the UPS is
disconnected and turned off. The batteries are rated for a 3-5 year service
life. The length of service life varies, depending on the frequency of usage
and ambient temperature. Batteries used beyond expected service life will
often have severely reduced runtimes. Replace batteries at least every 4
years to keep units running at peak efficiency.

7.2 Transporting the UPS

Please transport the UPS only in the original packaging (to protect against
shock and impact).

7.3 Storing the equipment

If you store the equipment for a long period, recharge the battery every 6 months
by connecting the UPS to utility power. The EBM charge to 90% capacity in less
than 3 hours.
However, recommends that the batteries charge for 48 hours after long-term
storage.
If the date has passed and the batteries were never recharged, do not use them.
Contact your service representative.
35