Basic Settings Of The Pa 2500 R (Configuration Menu) - T+A PA 2500 R User Manual

In the Configuration menu general device settings are adjusted. This menu is described in detail in the following chapter.
Calling up and operating
the menu
46
Basic settings of the PA 2500 R
(Configuration menu)

Briefly press the -button on the front panel or on the  button on
the remote control handset to call up the menu.

When you open the menu, the following Select points appear on the screen:
Using the front-panel controls:

The volume knob is used to select any point within the menu system.

To change a selected menu item, press the volume knob to confirm your
choice, then adjust the value by rotating the knob.

After making the adjustment, press the volume knob again to adopt the new
setting.

You can interrupt the process at any time by pressing the  button; in
this case any changes you have made are discarded.

Holding the volume knob pressed in takes you one level higher in the menu
system.

Press the  button again to quit the menu.
Using the remote control handset:

Use the  /  buttons to select an item in the menu.

If you wish to change a selected menu item, first press the  button,
and then use the  /  buttons to alter it.

After making the change, press the  button again to accept the new
setting.

You can press the  button at any time to interrupt the process; the
change is then abandoned.

Press the  button again to leave the menu.