Audio Output - Canon XA50 Instruction Manual

Audio Output

Audio Output
The camcorder can output audio from the SDI OUT terminal (u only), HDMI OUT terminal, × (headphone)
terminal or built-in speaker (monaural audio;
110
with 4-channel audio, you can select which audio channels are output.
Audio output configuration
MP4 audio format
[ LPCM 16bit 4CH]
[ AAC 16bit 2CH]
>
1 [3 Recording Setup] > [¸ Audio Format].
2
You can select the pair of audio channels that are output from the terminal.
Operating modes:
Selecting the Audio Channels for Headphone or Speaker Output
You can select the audio channels that are output from the × (headphone) terminal or speaker.
1 Select [Monitor Channels].
> [¡ # Audio Setup] > [Monitor Channels]
2 Select the desired option and then select [X].
Setting
[ƒ CH1/CH2]
[š CH1/CH1]
[Ÿ CH2/CH2]
[ CH1+2/CH1+2]
[ CH3/CH4]*
[ CH3/CH3]*
[ CH4/CH4]*
[ CH3+4/CH3+4]*
[ CH1+3/CH2+4]*
* For MP4 clips: In
NOTES
• If you set an assignable button to [œ Monitor Channels] (A 94), you can press the button to toggle
between the audio channel output options.
Audio configuration of the
1
recorded clips
4-channel linear PCM,
16 bit
2-channel MPEG-2 AAC-LC,
bit rate: 256 kbps
mode, these options are available only during 4-channel audio recording.
mode only). When recording or playing back clips recorded
Audio output configuration
u
SDI OUT terminal
4-channel linear PCM,
24 bit
Audio output
L
CH1
CH1
CH2
CH1+CH2 mixed
CH3
CH3
CH4
CH3+CH4 mixed
CH1+CH3 mixed
2
HDMI OUT terminal
2-channel linear PCM,
16 bit
R
CH2
CH1
CH2
CH1+CH2 mixed
CH4
CH3
CH4
CH3+CH4 mixed
CH2+CH4 mixed