Changing The Language; Changing The Time Zone - Canon XA50 Instruction Manual

Date, Time and Language Settings

Changing the Language

The default language of the camcorder is English. You can set it to one of 27 languages.
Refer to Setup Menus (A 29) for details on how to navigate the menu to complete this procedure.
28
Operating modes:
1 Select [Language H].
> [B ! System Setup] > [Language H]
2 Select the desired language and then select [OK].
3 Select [X] to close the menu.

Changing the Time Zone

Change the time zone to match your location. The default setting is New York. In addition, the camcorder is able
to retain the date and time of an additional location. This is convenient when you travel so that you can set the
camcorder to match the time of your home location or that of your travel destination.
Refer to Setup Menus (A 29) for details on how to navigate the menu to complete this procedure.
Operating modes:
1 Select [Time Zone/DST].
> [B ! System Setup] > [Time Zone/DST]
2 Select ["] to set the home time zone, or [#] to set the time zone of your destination when you are
traveling.
3 Select [Ï] or [Ð] to set the desired time zone. If necessary, select [$] to adjust for daylight saving
time.
4 Select [X] to close the menu.